Create a mini-fridge at home in 1000
Who does not like ice cream in the summer and cold water from the refrigerator but the refrigerator in college who buys or friends at home will not necessarily get you fridge.
So why not own a fridge to be made. It requires no engineering degree should be just below the little stuff.
One by one, follow the step by itself can create their own mini fridge. So why the delay start of the mini-fridge to us.
What should be the ones to make the fight the fridge.What should be the ones to make the fight the fridge.
1 cardboard box
2-cutting scissors
3. A switch (on-off) to
4- Hitsink coil
5- Plentr unit (can order online)
6- The AC adapter (can be requested online) Also You can pick up these goods 1- Paint2. Read the tape.
step 1. Down a hole on the first cardboard box, being careful to make the hole bigger so they fit inside the coil should be as large as Hitsing.
Step 2. Now Hitsing unit to fit inside the box (see the photo).
Step 3. Hitsing unit after applying on the outside and keep the Peltier Unit.
Step 4. Now Peltier Unit out by removing the wires connect to the switch and the switch out of the box and place it.
Step 5. Box now and then engaged in direct peltier unit and place it on top of the silver coils. You can put up any bottle of the coil. If the coil when cold cold bottle will be laid up.
Step6. paper by putting it out of the box, as well as under the sentence imposed and the Onr 4 block up a bit so you can get out of the heat is radiated from the heat sink unit.
So why not own a fridge to be made. It requires no engineering degree should be just below the little stuff.
One by one, follow the step by itself can create their own mini fridge. So why the delay start of the mini-fridge to us.
What should be the ones to make the fight the fridge.What should be the ones to make the fight the fridge.
1 cardboard box
2-cutting scissors
3. A switch (on-off) to
4- Hitsink coil
5- Plentr unit (can order online)
6- The AC adapter (can be requested online) Also You can pick up these goods 1- Paint2. Read the tape.
● Step 1
step 1. Down a hole on the first cardboard box, being careful to make the hole bigger so they fit inside the coil should be as large as Hitsing.
● Step 2
Step 2. Now Hitsing unit to fit inside the box (see the photo).
● Step 3
Step 3. Hitsing unit after applying on the outside and keep the Peltier Unit.
● Step 4
Step 4. Now Peltier Unit out by removing the wires connect to the switch and the switch out of the box and place it.
● Step 5
Step 5. Box now and then engaged in direct peltier unit and place it on top of the silver coils. You can put up any bottle of the coil. If the coil when cold cold bottle will be laid up.
● Step 6
Step6. paper by putting it out of the box, as well as under the sentence imposed and the Onr 4 block up a bit so you can get out of the heat is radiated from the heat sink unit.
Comments
Post a Comment